Walther GSP Brass catcher

Brought to you by Zero Bullet Company Inc.

Moderators: pilkguns, m1963, Isabel1130

Post Reply
jerryg22
Posts: 50
Joined: Thu Jan 06, 2011 3:49 pm
Location: South Florida

Walther GSP Brass catcher

Post by jerryg22 »

Does anyone have experience with the plastic brass catcher and know how many empty shells it holds? Same question for the cloth one. Thanks.
Marc Orvin
Posts: 356
Joined: Sat Aug 28, 2004 12:23 am
Location: Colorado

Re: Walther GSP Brass catcher

Post by Marc Orvin »

I use the cloth one on a 32 S&W and it will hold 5 easy and 10 maybe. I usually just empty it after each series of 5.

They cost a lot for no more than it is, but it works.
jerryg22
Posts: 50
Joined: Thu Jan 06, 2011 3:49 pm
Location: South Florida

Re: Walther GSP Brass catcher

Post by jerryg22 »

Marc Orvin wrote:I use the cloth one on a 32 S&W and it will hold 5 easy and 10 maybe. I usually just empty it after each series of 5.

They cost a lot for no more than it is, but it works.
Thanks, now wondering if the platic one holds more shells????
fc60
Posts: 749
Joined: Fri Nov 25, 2005 11:46 am
Location: Western Washington State, USA 98385

Re: Walther GSP Brass catcher

Post by fc60 »

Greetings,

If you are referring to the plastic catcher that attaches to the base of the magazine, 5 shots.

I have one and enjoy it very much.

Put a little grease on the dovetail joint so it slides on and off easier.

Cheers,

Dave
Leon
Posts: 834
Joined: Mon Jul 07, 2008 4:04 am
Location: Sydney, Australia

Re: Walther GSP Brass catcher

Post by Leon »

Have both and prefer the hard plastic one...

Thanks for the grease tip Dave... It had never occurred to me :)
Marc Orvin
Posts: 356
Joined: Sat Aug 28, 2004 12:23 am
Location: Colorado

Re: Walther GSP Brass catcher

Post by Marc Orvin »

Another small point. I don't think the plastic one will qualify for any ISSF events as it makes the pistol too wide to fit in the box. And yes, the pistol must fit the box with all accessories attached. The cloth bag will fit the box.
Post Reply