Need info on CO2 filling from paint ball tanks

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
continental
Posts: 13
Joined: Sun Apr 26, 2009 7:35 am
Location: northwest Pennsylvania

Need info on CO2 filling from paint ball tanks

Post by continental »

I have a Walther CPM-1 and my bulk tank is long out of hydro-test. As an alternate to retest/refill my bulk tank, I am wondering if anyone has used the 20 and 24 ounce CO2 bulk tanks they sell for paint ball. It seems I would need an adapter and so am wondering if anyone has gone down this route and can advise me on the correct adapter or a source for such an item. I did speak with two retailers who sell the paintball tanks and they have no adapters nor advice. Thanks in advance for any help.
Top
Gwhite
Posts: 3427
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Re: Need info on CO2 filling from paint ball tanks

Post by Gwhite »

I'm not sure what would be required, but these folks would know if it is do-able, and would probably have the hardware:

http://www.bestfittings.co.uk/
Top
continental
Posts: 13
Joined: Sun Apr 26, 2009 7:35 am
Location: northwest Pennsylvania

Re: Need info on CO2 filling from paint ball tanks

Post by continental »

Gwhite - thank you....very interesting website. I will send them an email and see what develops Thanks again for the tip./Frank
Top
Post Reply

Return to “Olympic Pistol”