Gentlemen.. since I hate to send out my M80 and seal kits are available...
is there anywhere on the web where I can find instructions on how to
probably disassemble a M80 pistole? In the USA there are no trusted dealers.
M80 disassembly instructions Feinwerkbau
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
-
buffalodiesel
- Posts: 1
- Joined: Sun Dec 21, 2014 8:23 pm
Re: M80 disassembly instructions Feinwerkbau
Try our host for such things, including repairs.
-
kevinweiho
- Posts: 949
- Joined: Wed Oct 14, 2009 12:44 pm
- Location: Costa Rica, Central America
Re: M80 disassembly instructions Feinwerkbau
I did a complete seal change and lube with my pistol using only the exploded parts drawing, which can be downloaded directly from FWB. Remember to take pictures just in case you forget how the part was assembled. http://www.feinwerkbau.de/en/Service+Do ... d-drawings
If you are mechanically inclined, I would recommend that you take a look at Mark Cone's diassembly of his FWB 65. http://s699.photobucket.com/user/cones_ ... t=9&page=4
The internals are very similar, except for the recoil/recoilless mechanism. Good luck, and tell us how you went with the diassembly/assembly of your pistol.
If you are mechanically inclined, I would recommend that you take a look at Mark Cone's diassembly of his FWB 65. http://s699.photobucket.com/user/cones_ ... t=9&page=4
The internals are very similar, except for the recoil/recoilless mechanism. Good luck, and tell us how you went with the diassembly/assembly of your pistol.