The real Cesare Morini and his grips

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
therider
Posts: 456
Joined: Fri Nov 29, 2013 6:33 pm
Location: Germany

The real Cesare Morini and his grips

Post by therider »

I just want to share my great day.

Today I drove to Parma, to visit Cesare Morini, founder of the famous swiss company which carries his name, and now back to Italy with his new company Match Guns.

I was adviced by many old experienced shooters in Germany to get a custom grip made by Cesare Morini and nobody else.
And now I know why!

I went with the terrible grip of the LP10E. The grip gave me a horrible feeling in the hand (which i discussed in 2 other posts in here), never tried any thing as bad as that. I was about to give away the LP10E after only 10 days of use!

Also, we discovered that you cannot even adjust the grip using the specific screws in the body of the pistol, without touching the wood with the rear sight! What a disappointment for a great and expensive pistol!!

Any way, Cesare Morini made a masterpiece out of that!

He has worked continuously for 4 hours!!!!!!!!!!!
He nerver watched the time and never rushed.
He kept checking, modifying, filing and adding "microns" of material since he was finally satisfied.

He is a fanatic perfectionist....as much as I am!

The final result.
He has asked me many times to rise my arm, with closed eyes, aiming at him.
Then I had to open the eyes: Front an rear sight were always perfectly aligned.
Moreover he asked me to OPEN THE FINGERS in that position.
Not only the pistol would not fall on the floor, but the front and rear sight remained every single time perfectly aligned even with the fingers not holding the grip!
I COULD ACTUALLY PULL THE TRIGGER WITHOUT HOLDING THE GRIP, and the front an rear sight remained perfectly in line and did not move!!!!!!!
I could not believe this!

The feeling of the grip in the hand is a real dream! What a pleasure to hold it! I do not need to apply any strenght.
I have the feeling that the pistol is simply an extension of the bones of the forarm, and that it is completely weightless.

I feel really sorry for those of you, guys, who are far away (US? Au?), and cannot get such a masterpiece.... If you do come to Italy, don't forget your pistol.... what I got today is not custom made, this is ART!

Now, if I do not match the world record, I'd better give up! ....kidding
:-)
User avatar
6string
Posts: 445
Joined: Tue Aug 14, 2007 11:53 pm

Post by 6string »

Thanks for reporting your great experience. Your comments remind of my recollections and experiences with the old school Hammerli craftsmen, of which there are precious few left.
Despite all the advances in manufacturing, and all the improvements in adjustments, there is still a real need for the skilled craftsman to bring out the pinnacle of refinement.

Best Regards,
Jim
David M
Posts: 1676
Joined: Wed Mar 24, 2004 6:43 pm

Post by David M »

Photo's, photo's, photo's...........
therider
Posts: 456
Joined: Fri Nov 29, 2013 6:33 pm
Location: Germany

Post by therider »

I agree with you Jim.
I am going to get it laser scanned before something happens!!! I do not want to take risks.... Cesare Morini looks like a very fit person, but he is no 20yo any more! And what a pleasant man.
I add some pics
poogi
Posts: 47
Joined: Tue Jul 30, 2013 1:07 pm
Location: SLC, UT

Re: The real Cesare Morini and his grips

Post by poogi »

therider wrote:Moreover he asked me to OPEN THE FINGERS in that position. Not only the pistol would not fall on the floor...
I'd like to see a picture of what this means.
therider
Posts: 456
Joined: Fri Nov 29, 2013 6:33 pm
Location: Germany

Post by therider »

I am trying to upload, but they are larger than 250k and does not allow .. I am trying to reduce size with iPhone, but so far unsuccessful
therider
Posts: 456
Joined: Fri Nov 29, 2013 6:33 pm
Location: Germany

Post by therider »

Can somebody help please? I upload 200k pic with iPhone but then I get an empty page. Cheers
User avatar
RobStubbs
Posts: 3183
Joined: Mon Mar 01, 2004 1:06 pm
Location: Herts, England, UK

Post by RobStubbs »

therider wrote:Can somebody help please? I upload 200k pic with iPhone but then I get an empty page. Cheers
I 'think' I normally post my pictures to a hosting site such as photobucket and paste the image file location (url) here. There's certainly a limit to the size of image you can upload directly to the site, it may be 60 or 80K.

Rob.
therider
Posts: 456
Joined: Fri Nov 29, 2013 6:33 pm
Location: Germany

Post by therider »

Thanks rob,
However here it says 256k as a limit, and I reduced mine to 200k.
I will try later from my laptop.
User avatar
RobStubbs
Posts: 3183
Joined: Mon Mar 01, 2004 1:06 pm
Location: Herts, England, UK

Post by RobStubbs »

therider wrote:Thanks rob,
However here it says 256k as a limit, and I reduced mine to 200k.
I will try later from my laptop.
It says that, but I'm not sure it's correct...

Rob.
User avatar
Jack Milchanowski
Posts: 206
Joined: Sun Jul 06, 2008 6:35 am
Location: In the woods of Sunset, Texas, U.S.
Contact:

Post by Jack Milchanowski »

Therider,

You are welcome to email them to me. I can re-size them and upload them for you without any problem. jack@jemfoto.com
TB
Posts: 236
Joined: Fri Jul 11, 2008 5:50 am
Location: Denmark

Post by TB »

There is an app for IPhone called SimpleResize you can use to reduce the picture size. It is free and pretty easy to use.
therider
Posts: 456
Joined: Fri Nov 29, 2013 6:33 pm
Location: Germany

Post by therider »

Closed fingers
Attachments
image.jpg
image.jpg (5.9 KiB) Viewed 12064 times
therider
Posts: 456
Joined: Fri Nov 29, 2013 6:33 pm
Location: Germany

Post by therider »

And opened fingers
Attachments
image.jpg
image.jpg (5.77 KiB) Viewed 12060 times
therider
Posts: 456
Joined: Fri Nov 29, 2013 6:33 pm
Location: Germany

Post by therider »

The grip
Attachments
image.jpg
image.jpg (9.41 KiB) Viewed 12057 times
therider
Posts: 456
Joined: Fri Nov 29, 2013 6:33 pm
Location: Germany

Post by therider »

Following Rob's suggestion here is a link

<iframe></iframe>
therider
Posts: 456
Joined: Fri Nov 29, 2013 6:33 pm
Location: Germany

Post by therider »

obviously something went wrong....i try again. sorry for this

http://s842.photobucket.com/user/therid ... slideshow/
therider
Posts: 456
Joined: Fri Nov 29, 2013 6:33 pm
Location: Germany

Post by therider »

Jack, thanks for volunteering. I guess this works good enough now.
poogi
Posts: 47
Joined: Tue Jul 30, 2013 1:07 pm
Location: SLC, UT

Post by poogi »

Hmmm, looks like i need to putty up a beaver tail on my izh grip[/list]
seamaster
Posts: 645
Joined: Sun Jan 16, 2011 6:24 pm

Post by seamaster »

What a clamp on the upper and lower parts of backside. No wonder you can let fingers off and still maintain position.


But no adjustable shelf?
Post Reply