How High To Hang 10M AP Target?

A place to discuss non-discipline specific items, such as mental training, ammo needs, and issues regarding ISSF, USAS, and NRA

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Post Reply
breakfastchef
Posts: 13
Joined: Thu Oct 24, 2013 10:07 pm
Location: NC, United States

How High To Hang 10M AP Target?

Post by breakfastchef »

What is the regulation height one should hang a 10M AP target? Yes, newb-type question; please bear with me. I have searched for this information on the Web and never came up with an answer.
User avatar
rmca
Posts: 1203
Joined: Sun Nov 04, 2012 3:55 pm
Location: Lisbon, Portugal

Post by rmca »

6.4.6.1 Height of Target Centers
Target centers must be within the following heights when measured from the level of the firing point floor:

Range Standard Height Variation Allowable
300m 3.00 m +/- 4.00 m
50m 0.75 m +/- 0.50 m
25m 1.40 m + 0.10 m / - 0.20 m
10m 1.40 m +/- 0.05 m
50m Running Target 1.40 m +/- 0.20 m
10m Running Target 1.40 m +/- 0.05 m

All target centers within a group of targets or range must have the
same height (±1 cm)

Get the full rules here:

http://www.issf-sports.org/theissf/rules.ashx

Hope this helps
breakfastchef
Posts: 13
Joined: Thu Oct 24, 2013 10:07 pm
Location: NC, United States

Information Greatly Appreciated

Post by breakfastchef »

Thank you. I bookmarked the ISSF link you provided.
Rover
Posts: 7055
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Post by Rover »

Forward this to Conradin if you please.
User avatar
rmca
Posts: 1203
Joined: Sun Nov 04, 2012 3:55 pm
Location: Lisbon, Portugal

Post by rmca »

Rover wrote:Forward this to Conradin if you please.
:)
ihasagun
Posts: 145
Joined: Wed Sep 18, 2013 8:15 pm

Post by ihasagun »

http://www.pilkguns.com/buildrange.shtml

That says 55 inches height for the 10 ring. So that's what I did.
User avatar
rmca
Posts: 1203
Joined: Sun Nov 04, 2012 3:55 pm
Location: Lisbon, Portugal

Post by rmca »

ihasagun wrote:http://www.pilkguns.com/buildrange.shtml

That says 55 inches height for the 10 ring. So that's what I did.
55 inches x 2,54 = 139,7cm » 1,397 meters (for those who don't speak metric)

It´s within the tolerance allowed. Your range is ok.


Hope this helps
Post Reply