second stage trigger problem

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
amarinder
Posts: 66
Joined: Fri Mar 29, 2013 10:46 am

second stage trigger problem

Post by amarinder »

hi....

i need some help regarding my lp 400. When i start my second stage trigger, it seems like i have hit the wall....increasing the second stage pressure tightens my arm' muscles causing shaking of the arm. I have checked trigger weight, its exactly 500gms.

kindly guide me . i m just a novice . use simple language to explain the sol.

and what is the let-off point?

regards
David M
Posts: 1676
Joined: Wed Mar 24, 2004 6:43 pm

Post by David M »

A trigger action is made up of a first stage travel with a first stage weight,
a second stage point at which the second stage takes effect with a second stage weight. A trigger point where the trigger sear releases firing the action and after travel to a trigger stop.
The length of the second stage dictates the type of trigger feel, very very short gives a break like glass feel but requires a fair second stage weight.
A longer second stage can give a more roll off feel and can be set with a much lighter second stage weight.
Regardless first stage weight plus second stage weight equals total trigger weight.
The early Walther LP400 trigger has a limited second stage weight, later pistols have a change of springs (revision H) which allows more adjustment.
Nev C
Posts: 89
Joined: Thu Feb 09, 2006 6:53 am
Location: Melbourne, Australia

Chicken finger

Post by Nev C »

Do a search on this site for "chicken finger"
Post Reply