pellet weight

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
mctrucky
Posts: 74
Joined: Thu May 09, 2013 4:06 am
Location: UK

pellet weight

Post by mctrucky »

Hi all,

I use a Morini 162ei.

I batch tested pellets a couple of years back and ended up with a load of H&N Finale match rifle pellets, with velocity cranked up.

When these ran out I went back to RWS R10 pistol pellet and backed off the velocity to compensate for the lighter pellet. (Ran both pellets about 505 fps)

I recently tested the QY Chinese pellets, and got some good results with one batch, and poor results with a different batch (although same size and weight).

I'll buy 10k of the 'good' batch, and then adjust velocity to optimise - but my question is: Is there a down side to using heavier rifle pellets in a pistol? (Note Morini has no lp10 style recoil absorbtion).

Thanks,
McT
brent375hh
Posts: 741
Joined: Wed Apr 17, 2013 8:04 am
Location: Minneapolis

Post by brent375hh »

In my very limited experience with light (7.0) grain pellets vs 8.0-8.3 grain pellets, the shot is closer to my call. My assumption for this is the shorter barrel time and recoil that is all but gone. I just tried some R10 lights and wish I did not have 5K H&N 7.7 grain pellets to use up first.
Post Reply