Hi all,
I use a Morini 162ei.
I batch tested pellets a couple of years back and ended up with a load of H&N Finale match rifle pellets, with velocity cranked up.
When these ran out I went back to RWS R10 pistol pellet and backed off the velocity to compensate for the lighter pellet. (Ran both pellets about 505 fps)
I recently tested the QY Chinese pellets, and got some good results with one batch, and poor results with a different batch (although same size and weight).
I'll buy 10k of the 'good' batch, and then adjust velocity to optimise - but my question is: Is there a down side to using heavier rifle pellets in a pistol? (Note Morini has no lp10 style recoil absorbtion).
Thanks,
McT
pellet weight
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
-
- Posts: 741
- Joined: Wed Apr 17, 2013 8:04 am
- Location: Minneapolis