fwb co2 cylinders

mru · Post by **mru** » Sat Feb 09, 2013 4:11 pm

will the short cylinder from the model 2 work on the c-10 and are they available somewhere in usa? I would like to put a short cylinder on my c-10 to reduce the forward weight. Thanks-

renzo · Post by **renzo** » Sat Feb 09, 2013 6:44 pm

Yes they do, the cylinder thread is the same in the C2, C10 and C20.

I did the same once (using the short cylinder) although for me it was a step backwards.

As to where to get it, let's some shooter from the USA answer that one.

John C · Post by **John C** » Sat Feb 09, 2013 11:25 pm

Nevermind....all my cylinders are long.

-John

ModestoPete · Post by **ModestoPete** » Fri Feb 22, 2013 7:05 pm

You might check http://www.airgunsofarizona.com/ or http://www.pyramydair.com/.

Rover · Post by **Rover** » Fri Feb 22, 2013 9:25 pm

Put an ad on the Classified here.

luftskytter · Post by **luftskytter** » Sat Feb 23, 2013 4:35 am

I've tried a C5 cylinder on a model 2 and it works.
The C5 (5 shot) is shorter than the others and has a short cylinder.

The model 2 uses the cylinder valve as a firing valve, so it has no pressurized chamber. This means the cylinder valve stays closed until you fire a shot.

Crete · Post by **Crete** » Wed Feb 27, 2013 4:26 am

FWB CO2 cylinders and their spare parts.

Complete new cylinders 41 and 53 grams: http://www.egun.de/market/item.php?id=4235197

Either complete new cylinders or spares for resealing existing ones: forbes@forbesws.com.au

The latter's web site is here: http://www.forbesws.com.au/targetshooting-home.html

Best of luck.

TargetTalk

fwb co2 cylinders

fwb co2 cylinders

Source for Feinwerkbau Parts

Source of new FWB CO2 cylinders, spare parts / rebuilding