Touch up for Morini AP?

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
IPshooter
Posts: 462
Joined: Fri Jul 22, 2005 2:55 pm

Touch up for Morini AP?

Post by IPshooter »

I have a couple of small nicks in the finish on my 162EI. The nicks are on the side near the loading lever.

Does anyone have a recommendation for something to touch it up that will blend well?

TIA

Stan
Top
Rover
Posts: 7055
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Post by Rover »

You could try a cold blue (available at a good gun store) or just touch it with a fine point Sharpie.
Top
Gwhite
Posts: 3427
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Post by Gwhite »

If it's on the frame, I believe that is aluminum. Birchwood Casey sells an aluminum touch-up chemical. The touch-up bluing products meant for steel will not work.

Or, use a sharpie.
Top
Misny
Posts: 993
Joined: Tue Mar 02, 2004 9:28 pm
Location: Indiana

Post by Misny »

I've used Birchwood Casey Aluma Black on aluminum frame pistols and rifles, with small marks, with excellent results. I highly recommend it.
Top
Post Reply

Return to “Olympic Pistol”