Loading .32 cal GSP

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
dartvidar
Posts: 9
Joined: Sat Oct 02, 2010 4:59 pm
Location: Norway

Loading .32 cal GSP

Post by dartvidar »

I will start to load ammunision to my GSP .32 cal.
Do anyone have a good load for my GSP?
I have the choice to buy 84 grain and 98 grain WC bullets, what will you recomend to use for indoor and outdoor shooting?

Thanks
PFribley
Posts: 346
Joined: Thu Aug 19, 2010 8:42 pm

.32

Post by PFribley »

98gr.
User avatar
Richard H
Posts: 2654
Joined: Mon Mar 01, 2004 11:55 am
Location: Guelph, Ontario
Contact:

Post by Richard H »

I use 1.3gr VV N310 with 98gr Lapua, FWB an Speer bullets. Have tested 1.1-to 1.5 gr. VV N310 and settled on 1.3gr.

I also have used 1.5gr of Winchester 231 with the same bullets.
dartvidar
Posts: 9
Joined: Sat Oct 02, 2010 4:59 pm
Location: Norway

Post by dartvidar »

Richard H wrote:I use 1.3gr VV N310 with 98gr Lapua, FWB an Speer bullets. Have tested 1.1-to 1.5 gr. VV N310 and settled on 1.3gr.

I also have used 1.5gr of Winchester 231 with the same bullets.
Thanks Richard.
Do you use this bullet for both indoor and outdoor shooting? Have you tried lighter bullets also like 84 Grain?
buonvento
Posts: 91
Joined: Sat Nov 08, 2008 6:44 am
Location: Trani - Italy

Haendler & Naterman loading data for Walther GSP

Post by buonvento »

.313/090 greased match - COL 24.6 - case Lapua - primer WSP - N310 1.6 grains - roll crimp - 240 m/s

.314/100 HS - COL 23.4 - case Geco - primer RWS 4031 - Rottweil P801 1.4 grains - taper crimp - 216 m/s

.314/100 greased standard - COL 23.4 - primer RWS 4031 - Rottweil P801 1.3 grains - roll crimp - 219 m/s

.313/100 greased match - COL 24.6 - case Lapua - primer WSP - N310 1.7 grains - roll crimp - 231 m/s

All these reloading data (tested on Walther GSP) were on the old H&N website.

I haven't tested it, I don't have a GSP and don't know the P801. I also think that maybe 1.6 - 1.7 of N310 is a too hot load.
User avatar
deadeyedick
Posts: 1198
Joined: Thu Jan 24, 2008 5:55 pm
Location: Australia

Post by deadeyedick »

1.6 - 1.7 of N310 is a too hot load.
1.2 is all you will need.
User avatar
Richard H
Posts: 2654
Joined: Mon Mar 01, 2004 11:55 am
Location: Guelph, Ontario
Contact:

Post by Richard H »

Yes I use the same for both indoor and out. I only tried the lighter bullets a few times, at that time I really didn't notice and advantage so stuck with the 98gr (easier to find and a larger selection around here). I have loaded a little hotter for the 50 yard NRA match (1.4-1.5gr VV N310)
TonyT
Posts: 267
Joined: Fri Aug 20, 2004 6:50 am
Location: Scottsdale, Arizona

Post by TonyT »

I used the load recommended by Don Nygord - 1.5 gr. WST and 98 gr. LHBWC.
Post Reply