I am new to this forum and new to bullseye pistol shooting. I recently acquired an older Ruger MKII with a heavy barrel. I have tried Winchester, Remington and Federal Champion ammunition but I get jams with all of them. Is there a bullet that most of you Ruger shooters use? (assuming some of you shoot Rugers)
Thanks, John
Ammunition for Ruger MKII
Moderators: pilkguns, m1963, Isabel1130
http://www.1bad69.com/ruger/stovepipe.htm
Look at the magazine fix here. The leading edge of the rear lips often hits the extracting case rim. I prefer the slope on the lip over lowering the whole magazine.
Also consider the Volquartsen extractor switch.
http://www.1bad69.com/ruger/index.htm
http://www.guntalk-online.com/service.html
Look at the magazine fix here. The leading edge of the rear lips often hits the extracting case rim. I prefer the slope on the lip over lowering the whole magazine.
Also consider the Volquartsen extractor switch.
http://www.1bad69.com/ruger/index.htm
http://www.guntalk-online.com/service.html
Have you field-stripped it and given it a good cleaning/light oiling?
In my experience, these guns will shoot just about anything. Except for maybe some of the subsonic stuff.
One "sleeper" for my MKII was Federal Automatch, available at Walmart of all places. About $13.50/325 rounds. And it shot very accurately.
In my experience, these guns will shoot just about anything. Except for maybe some of the subsonic stuff.
One "sleeper" for my MKII was Federal Automatch, available at Walmart of all places. About $13.50/325 rounds. And it shot very accurately.
-
- Posts: 75
- Joined: Sun Sep 28, 2008 10:39 am
- Location: Eastern MA
-
- Posts: 488
- Joined: Tue Mar 02, 2004 10:56 am
- Location: Kansas
Hi
My Mk II wasn't feeding well after a few years, and an extractor helped. The last round always failed to feed, so just as an experiment, I bought a new Mk II magazine at the gun store. Since it worked, I bought new springs for the original two magazines. Now the Ruger works all of the time.
Later
Mike
Wichita KS
My Mk II wasn't feeding well after a few years, and an extractor helped. The last round always failed to feed, so just as an experiment, I bought a new Mk II magazine at the gun store. Since it worked, I bought new springs for the original two magazines. Now the Ruger works all of the time.
Later
Mike
Wichita KS