12 o'clock hold
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
12 o'clock hold
Does anyone use a 12 o'clock hold or reverse flat. Maybe it just a Bullseye thing?
-
- Posts: 444
- Joined: Thu May 22, 2008 8:06 am
- Location: Auburn, AL
What is the advantage?
Sub-six advantage is that you are aligning black sights on white
Center hold advantage for precision really isn't much for duello and rapid fire there is no white to do sub six so center is best.
I cant see the advantage of aligning the sights high on the black, there might be one, but I don't know what it is.
Sub-six advantage is that you are aligning black sights on white
Center hold advantage for precision really isn't much for duello and rapid fire there is no white to do sub six so center is best.
I cant see the advantage of aligning the sights high on the black, there might be one, but I don't know what it is.
Don't know who said anything about a thin line of white. That would be a six o'clock hold (bottom of the black). I believe my post spelled out the advantage of sub-six.
The advantage of sub-six to six is the fact that it an area aim as opposed tp a point aim, which will have a tendency to make a shooter over hold, or snatch that trigger.
The advantage of sub-six to six is the fact that it an area aim as opposed tp a point aim, which will have a tendency to make a shooter over hold, or snatch that trigger.
- deadeyedick
- Posts: 1198
- Joined: Thu Jan 24, 2008 5:55 pm
- Location: Australia
-
- Posts: 444
- Joined: Thu May 22, 2008 8:06 am
- Location: Auburn, AL
Yes, precisely.
First I think we needed to know if this was a dot sight or irons; that would affect the answer somewhat!
For Irons:
I could see some advantages to using a "true" over-12 hold (ie, no black at all showing) as that would at least have the advantages of being an area hold.
If, however, one was considering the use of the "peek a boo hold" with the top edge of the target bobbing up and down over hte front post, well, that would be a different matter. In that case we would have all the disadvantages (already mentioned ) of the center hold, with the added disadvantage of being a "point hold" (or "Oh No Yank At It" or "Snatch It" hold).
Then again, this raises the whole argument and misconceptions of just what constitutes "aiming" vs. "holding" vs. "pointing" etc. and how a shot is properly released using the align-accept-release method of the shot.
First I think we needed to know if this was a dot sight or irons; that would affect the answer somewhat!
For Irons:
I could see some advantages to using a "true" over-12 hold (ie, no black at all showing) as that would at least have the advantages of being an area hold.
If, however, one was considering the use of the "peek a boo hold" with the top edge of the target bobbing up and down over hte front post, well, that would be a different matter. In that case we would have all the disadvantages (already mentioned ) of the center hold, with the added disadvantage of being a "point hold" (or "Oh No Yank At It" or "Snatch It" hold).
Then again, this raises the whole argument and misconceptions of just what constitutes "aiming" vs. "holding" vs. "pointing" etc. and how a shot is properly released using the align-accept-release method of the shot.